Skip to content
Hardware reviewExcellent

Keychron Q1 Pro · 2023

Keychron Q1 Pro: the enthusiast keyboard that finally cut the cable, and kept almost everything else

Keychron Q1 Pro review. An aluminium, gasket-mounted 75% board with QMK, VIA and Bluetooth at a mid-range price; heavy, tall, and Bluetooth only.

Voxizer EditorialSection editor Pablo Huguet9 min read

Excellent

Editorial score out of 10

For a few years the advice to anyone who wanted a serious mechanical keyboard was a choice between two compromises. A wireless board meant plastic, a membrane-like hollowness and firmware locked behind a vendor app. A heavy aluminium board with a gasket mount and open firmware meant a cable, a kit, and often a group buy with a waiting list. The Keychron Q1 Pro is the board that ended that choice for most people. It is not the last word on either front, but it put both halves in one box at a price that made the old trade-off look like a habit.

8.6
Editorial score
#13
Of 33 hardware reviewed
2023
Released
9.0
Best at: Design

What Keychron did was simple to describe and hard to do at the price. It took the wired Q1, the keyboard that had already brought custom-style construction to a mass-market shop, and added Bluetooth, a large battery and a softer plate without giving up the metal case or the QMK firmware. The result is heavy, tall and occasionally fussy, and it is still the wireless 75% board that everything in its bracket gets measured against.

What it is

The Q1 Pro is a 75% keyboard: a function row and arrow keys kept, the number pad and most of the navigation cluster folded into a single column on the right, and a rotary knob in the top corner where an escape-row key would sit. The case is machined from a block of 6063 aluminium in two halves, with silicone pads between them, and the plate floats on gaskets above a layer of foam and the circuit board. Keychron calls this a double-gasket design, and the point of it is a typing feel with a little give and a sound with less metallic ring.

It was sold in two forms. The fully assembled version came with Keychron's own pre-lubricated K Pro switches, in a linear red and two tactile variants, brown and banana, plus a set of double-shot PBT keycaps in the KSA profile with legends for both macOS and Windows. The barebone version came without switches or keycaps, for buyers who already owned a set they liked. The two-tier offer matters: it lets the same board serve someone buying a first good keyboard and someone treating it as a chassis.

  1. 2021

    Keychron releases the wired Q1, an aluminium gasket-mount 75% board with QMK firmware

  2. January 2023

    The Q1 Pro launches on Kickstarter, adding Bluetooth 5.1 and a polycarbonate plate

  3. March–April 2023

    First units ship to backers, followed by general sale on Keychron's store

  4. 2024

    The Q1 Max follows, adding a 2.4 GHz receiver alongside Bluetooth

Keychron Q1 Pro
Keychron Q1 ProKeychron

Typing and performance

Nothing here was measured by us, and the honest summary of what was widely reported is that the typing feel is the strongest part of the package. The polycarbonate plate is more flexible than the steel plate of the wired Q1, and on a gasket mount that produces a softer, slightly bouncy keystroke and a deeper sound. The K Pro switches arrive lubricated from the factory, the stabilisers screw into the board rather than clipping to the plate, and the result, according to most launch coverage, is a board that sounds finished out of the box rather than one that needs an afternoon with a brush and a pot of grease before it is pleasant.

Wireless is where the specification sets limits. Over Bluetooth the keyboard polls at 90 Hz; over the USB-C cable it polls at 1000 Hz. For typing, programming and switching between a laptop, a tablet and a phone, the lower rate makes no practical difference. For fast competitive games it does, and reviewers at launch noted both the lack of a 2.4 GHz receiver and an aluminium case that shortens Bluetooth range compared with Keychron's plastic boards. The cable fixes both, which is a reasonable answer for a desk keyboard and an awkward one for a living room.

A wireless board that types like a custom one, provided it never has to leave the desk.

Battery life is a manufacturer figure rather than a reported one: a 4,000 mAh cell, rated for up to 300 hours with the lighting off and up to 100 hours with the RGB at its dimmest. Those are lab numbers and real use will be lower, but the capacity is generous for a keyboard, and the lighting is the main lever owners have over it.

Watch
Keychron Q1 Pro — trailer

Design and build

The Q1 Pro is a lump of metal, and that is both its appeal and its main practical drawback. The fully assembled version weighs a little over 1.7 kg, which means it does not slide, does not flex and does not travel. The case has a fixed typing angle of a little over five degrees with no flip-out feet, and the back edge stands tall before the keycaps are added. Combined with the high, sculpted KSA keycaps, the stack ends up well above the desk surface, and a palm rest stops being an accessory and becomes part of the setup for many owners.

The finish is where the price looks low. Keychron offered carbon black, silver grey and shell white cases, each anodised and sandblasted, with an aluminium knob that clicks as well as turns. The RGB is south-facing, which suits most aftermarket keycap sets, and the stock caps are not shine-through, so the lighting reads as a glow between the keys rather than through the legends. It is a restrained look for a keyboard that can light up, and the lighting can be switched off entirely without losing anything.

Q1 family at a glance
ModelYearConnectionWorth knowing
Q12021USB-C wiredSteel plate; the board that started the series
Q1 Pro2023Bluetooth 5.1 and USB-CPolycarbonate plate, 4,000 mAh battery, KSA keycaps
Q1 Max20242.4 GHz, Bluetooth and USB-CAdds a receiver for lower-latency wireless play
Gallery · 3 imagesKeychron

Features and software

The firmware is the quiet reason this board earned its reputation. Keychron ships QMK, the open-source keyboard firmware used across the custom scene, and supports VIA, which remaps keys, layers, macros and the knob from a browser or desktop app and saves the result to the keyboard itself. Nothing has to stay running on the computer, and the layout follows the board from machine to machine. A switch on the case flips between Mac and Windows layers, each with its own saved layout, which is a small thing that matters on a desk with two computers.

Hot-swap sockets accept three-pin and five-pin MX-style switches, so changing the feel later costs a set of switches and a few minutes with the included puller rather than a soldering iron. The construction itself is meant to be opened: screws rather than clips, foam that can be removed or added, a plate that can be swapped. This is the part of the Q1 Pro that a buyer from the gaming aisle may not notice and an enthusiast will value most. It turns a single purchase into something that can be adjusted for years.

How it weighs up

Typing feel
9/10
Soft, deep and finished from the box
Wireless speed
5/10
Bluetooth only; the cable is the fast mode
Portability
2/10
Over 1.7 kg of aluminium, built to stay put
Upgrade path
9/10
Hot-swap sockets, open firmware, a case meant to be opened
Value
9/10
Custom-scene construction at a mainstream price

Value and alternatives

At launch the fully assembled Q1 Pro listed at $199 and the barebone at $179. That was the price of a mid-range gaming keyboard in plastic, and less than many barebone gasket kits that shipped without switches or keycaps at all. That gap is the whole argument for it. Keychron has since released newer boards, including the Q1 Max with a 2.4 GHz receiver, which answers the main complaint here; the Pro remains the simpler, cheaper way into the same chassis for anyone whose wireless needs stop at typing.

Against a gaming flagship such as the Corsair K100 RGB, the comparison is less about which is better than about what a keyboard is for. The Corsair is built around speed, extra keys and software; the Keychron around feel, adjustability and open firmware, with Bluetooth added on top.

Head to head

Value
8.86.4
Design
9.07.9
Features
8.79.0
Performance
8.38.1

Keychron Q1 Pro edges it by 0.9. See them side by side

There is also a longer lineage at work. The IBM Model M showed decades ago that a heavy keyboard with a defined feel could outlast the computers around it, and the Q1 Pro belongs to the same school, with a battery and a firmware editor in place of a buckling spring.

The Q1 Pro is easiest to recommend to people who type for a living and want one board across every device on their desk, and hardest to recommend to anyone who needs to carry it or plays at a level where milliseconds count.

For you if

  • Writers, programmers and office workers who want an aluminium, gasket-mounted board without building one
  • Anyone switching between a Mac, a Windows machine and a tablet through the day
  • Tinkerers who want open firmware and hot-swap sockets as a starting point

Not for you if

  • Competitive players who want low-latency wireless rather than a cable
  • Anyone who needs a keyboard to travel in a bag
  • Typists who dislike tall, sculpted keycaps and do not want to replace them

For readers deciding between this and a wired board, the official page lists the variants still on sale.

What works

  • A machined aluminium case and gasket mount for the price of many plastic flagships
  • QMK and VIA remap every key and the knob without a vendor app running in the background
  • Hot-swap sockets take three- and five-pin switches, so the feel can change later
  • Three Bluetooth pairings plus a Mac/Windows toggle suit a desk shared by two machines

What doesn’t

  • Bluetooth only, with 90 Hz wireless polling; no 2.4 GHz receiver for low-latency play
  • Over 1.7 kg and tall at the back, so it lives on a desk, not in a bag
  • KSA keycaps are high and sculpted, and many owners will want a palm rest or new caps
ExcellentHow we score

The verdict

The Q1 Pro earns its score by doing the hard thing at the right price: it brings the construction and firmware of the custom keyboard scene to a board that works wirelessly with three devices and arrives ready to type on. Its reservations are about scope rather than quality. Bluetooth alone limits it for fast games, and its weight and height make it a desk fixture with a palm rest beside it. Keychron has since answered the wireless complaint with the Q1 Max, but the Pro remains the clearest statement of what the company set out to prove in 2023, that a mid-range price no longer has to mean a plastic keyboard with closed software.

Quick answers

Is Keychron Q1 Pro worth buying?

Voxizer scores Keychron Q1 Pro (2023) 8.6 out of 10 — excellent. The Q1 Pro earns its score by doing the hard thing at the right price: it brings the construction and firmware of the custom keyboard scene to a board that works wirelessly with three devices and arrives ready to type on. Its reservations are about scope rather than quality.

Who will enjoy Keychron Q1 Pro?

Writers, programmers and office workers who want an aluminium, gasket-mounted board without building one. Anyone switching between a Mac, a Windows machine and a tablet through the day. Tinkerers who want open firmware and hot-swap sockets as a starting point.

Who should skip Keychron Q1 Pro?

Competitive players who want low-latency wireless rather than a cable. Anyone who needs a keyboard to travel in a bag. Typists who dislike tall, sculpted keycaps and do not want to replace them.

What is Keychron Q1 Pro like, in short?

A full aluminium, gasket-mounted 75% board with Bluetooth, at a price closer to the mainstream than the custom scene. QMK firmware and VIA mean every key and the knob can be remapped without installing a driver. Hot-swap sockets and a barebone option make it a platform as much as a product. Bluetooth only: fine for typing across several machines, a step down for competitive games.

What readers say

Written by Voxizer members and checked by our moderators before they appear.

Written reviews

–

No written reviews yet

Write a review
9–10
0
7–8.5
0
5–6.5
0
3–4.5
0
0–2.5
0

Nobody has reviewed Keychron Q1 Pro yet. Be the first.

All reviews →

Verified sources

Published by the Voxizer editorial team — David Abellán, Ignacio Pineda, Pablo Huguet. Section editor for hardware: Pablo Huguet.

Revision history

  1. Published

Scores are revised when the facts behind them change, and the change is recorded here. How we score.